Rotary joint is a rotary joint suitable for both high and low pressure
The Rotary joint can be rotated 360 ° under the working pressure condition. For occasions where the hydraulic hose may be turned or twisted during work, the use of a rotary joint can eliminate the twist of the hose, greatly improve the service life of the hose, and prevent the failure and leakage.
The diameter of the rotary joint is from 6 to 40mm and the rated pressure is 40MPa. It can meet the needs of rotation at any corner and 300 revolutions per minute under working conditions. It has been widely used in metallurgy, automatic forging, mining, national defense and other departments for dynamic rotation Hydraulic system. A high-speed rotary joint suitable for both high and low pressure.
Rotary joint Its characteristics are:
1, compact structure, small size
2. It has a wide range of applications. As the material of the seal can be selected and placed in the front, the bearings and other parts are not in contact with the fluid medium, which prevents corrosion, so it can be used in any fluid (gas, water, oil, etc.)
3. Flexible rotation, this design uses a combination of self-lubricating plain bearings and flat rolling bearings, which effectively solves the friction of parts and the thrust after compression.
4. Reliable seal, select combination seal, suitable for high (40MPa) and low pressure, low friction coefficient, good strength and long life;
5. The connection method is not limited, and can be processed into pipe joints of any connection mode and diameter;
6. High speed: It can achieve relative movement speed within 5M / S of the seal.